The J7 seven-station centrifugal casting line integrates automated mold cleaning, coating, pouring, cooling and casting extraction for cylinder liner production. Up to six molds can circulate simultaneously through the production system.
J7
WELTOP
| Availability: | |
|---|---|
The J7 automated centrifugal casting line is designed for high-volume production of automotive and motorcycle cylinder liners.
Seven processing stations are connected through an indexing mold transfer system, allowing up to six molds to circulate through the production cycle.
The line configuration can be adapted to casting specifications and production requirements.

Key Features 01 Seven-Station Production System 02 Automated Mold Transfer 03 Automatic Pouring 04 Automated Mold Preparation 05 Fault-Tolerant Operation | Applications✓ Automotive Engine Cylinder Liners ✓ Motorcycle Engine Cylinder Liners ✓ Compressor Sleeves ✓ Other Suitable Tubular Cast Iron Castings |

TECHNICAL PARAMETERS
| No. | Parameter | Specification | Unit |
| 1 | Number of Stations | 7 | |
| 2 | Maximum Molds in Circulation | 6 | |
| 3 | Casting Outer Diameter | Ø70–100 | mm |
| 4 | Mold Raceway Diameter | Ø150–175 | mm |
| 5 | Support Roller Dimensions | Ø250 × 70 | mm |
| 6 | Outside Distance Between Support Rollers | 1270 | mm |
| 7 | Pipe Mold Speed | 0-2400 | rpm |
| 8 | Mold Length | 2,000–2,100 | mm |