 |
J522
WELTOP
The WELTOP Dual-Station Automated Centrifugal Casting Line is designed for high-volume cylinder liner production.
Two casting machines share one automated auxiliary system, integrating mold cleaning, coating, pouring, cooling and extraction. The result is higher productivity, lower labor requirements and stable casting quality.
✅ WHY CHOOSE WELTOP • 20+ Years Foundry Experience • 500+ Foundry Projects • Exported to 20+ Countries • Custom Engineering Support • Complete Casting Line Solutions | ✅ WHY CHOOSE THIS LINE ✓ Dual-Machine Design ✓ Fully Automated Production ✓ Servo-Controlled Auxiliary Stations ✓ Automatic Pouring & Weighing ✓ Intelligent Temperature Management ✓ PLC + HMI Control ✓ Reduced Labor Cost ✓ Stable Casting Quality |
✅ KEY BENEFITS ✓ Higher Productivity ✓ One Operator Operation ✓ Stable Casting Quality ✓ Lower Labor Cost ✓ Reduced Human Error ✓ Fast RO | ✅ APPLICATIONS • Engine Cylinder Liners • Compressor Sleeves • Hydraulic Sleeves • Bearing Sleeves • Cast Iron Tubes • Hollow Cylindrical Castings |
✅ Fully Automated Design
Process Workflow ：
1. Cleaning → 2. Spraying → 3. Pouring → 4. Cooling → 5. Casting Extraction
- Fully automated cycle time: 2-4min/casting (depending on casting size).
Technical parameters
Machine configuration can be customized according to casting dimensions, material and production requirements.
No. | Parameter | Value | Unit |
1 | Casting Diameter Range | Φ60~Φ120 | mm |
2 | Casting Length | 1600 | mm |
3 | Diameter of Mold Raceway | Φ100~Φ180 | mm |
4 | Diameter of Pallet Wheel | Φ300x70 | mm |
5 | Distance Between Two Pallets | 745 | mm |
6 | Distance Between The Ground and The Center of Mold | 720 | mm |
7 | Mold Speed | 0~2000 | rpm |
8 | Main Motor Power | 7.5 | KW |
